Bush LSBGHP, Instruction Manual

Page: 18 / 30

Installing your
Bringing it all toget
Building into fitted kitchen units
These hobs are designed for installation in fitted kitchen units up to 600mm deep with
suitable characteristics.
Any cabinet side panels taller than the height of the hob itself must be at least 150mm away
from the opening into which the hob is inserted.
Insertion and fixing
Before inserting the hob in the installation
opening, place the special gasket around the
bottom edge of the hob.
It is important to fix this gasket evenly,
without gaps or overlapping, to prevent liquid
from seeping underneath the hob.
1) Remove the pan stands and the burner caps
and turn the hob upside down, taking care not
to damage the ignition plugs and the
thermocouples.
2) Place the gasket around the bottom edge of
the hob as shown in the illustration on the
right.
3) Place the hob in the installation opening and
push it down so that the hob is resting firmly
on the cabinet, as show in the illustration. The
side springs will hold it in place.
Installing your
8
or online at www. us -support.com If you still require further assistance, call one of our experts on 01759 487838.