15
For any help concerning set up and use of your TV please call the
Customer Helpline: 0345 604 0105
First time setup
1.
Connect one end of an RF coaxial
cable (not supplied) to the aerial
socket in your wall. Connect the
other end of the cable to the RF (75)
socket in the bottom connection
panel on the back of the TV.
2.
Attach all other devices to the TV
following the advice given in the
instructions supplied with them.
3.
Slot the plug on the TV's mains
cable into a wall socket and turn the
power on if required.
4.
In standby mode, press the
button on the right side of the TV or
press the button on the remote
control to turn the TV on. The red
LED indicator on the front of the TV
will turn blue.
5.
After pressing the
OK
button you
will go to the First Time Installation
menu.
6.
Language is preset to English and
cannot be changed.
7.
Next press the
▼
button on the
remote control to select Country.
Use the
WX
buttons on the remote
control to select the country you are
tuning the TV in.
8.
Now press the
▼
button on the
remote control to select Tuning
mode. Use the
WX
buttons on
the remote control to select either
ATV + DTV (
analogue and digital
channels
), DTV (
digital channels
only
) or ATV (
analogue channels
only
).
9.
Press the
▼
button on the remote
control to select Environment. Use
the
WX
buttons on the remote
control to select between Home
First Time Installation
Back
Select
Adjust
Move
Country
UK
Language
English
Tuning Mode
DTV
Environment
Home Mode
Auto Tuning
Mode or Store Mode. If you select
to change to store mode, a warning
screen will appear asking if you
want to leave home mode. If you
do, press the
W
button to continue
Note:
Store Mode should only be
used if the TV is to be used as a
display in a shop.
10.
Once you have completed all of the
preliminary settings press the
▼
button on the remote control then
the
X
button to begin Auto Tuning.
Channel Tuning
Skip
Exit
19
Data
:
0
Radio
:
0
DTV
:
0
TV
:
0
Programme
Programme
Programme
Programme
%... UHF
CH
30
DTV
