Bush LE-32GKA, Instruction Manual

Page: 15 / 73

15
Remote control - Inserting batteries
Remove the battery cover on the back of the remote
control, gently push down and pull backwards at the
same time as shown.
Insert two AAA/R3 or equivalent type batteries. Ensure
the batteries are inserted the correct way and replace the
battery cover.
Note: When the remote control is not going to be used
for long periods of time, the batteries should be removed.
Otherwise the remote control may be damaged, caused
by battery leakage and corrosion.
Switching the TV On and Off
Switching the TV On
With power cord plug connected to the mains power
socket and TV in ‘ Standby ’ mode.
To switch the TV on from standby mode, either:
a: The Remote control; Press the “ ” button.
b: The TV; Press the “ ” button at the
bottom of the TV.
Switching the TV Off
Either press the “ ” button on the remote
control or press the “ ” button at the bottom of the TV,
the TV will then switch to standby mode.
Getting Started
You’ll be up and running in no time
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105 .
Getting Started
Push open
Close
Note the correct
polarity (+ or -).