Bush LE-32GKA, Instruction Manual

Page: 52 / 73

52
TV systems management
TV systems management
Let’s get started
1. Press the MENU button on the remote control.
2. Press the buttons to select the SETTING menu
then press the OK button.
3. Use the buttons to navigate through the menu
and press the OK button to select the item you wish to
change.
4. The main SETUP menu may close and the selected
items sub menu may appear. Use the and OK
buttons to change the settings.
5. Press the MENU button on the remote control to
return to the SETTING menu.
6. After you have made all of the changes, press the
EXIT button on the remote control to close the
SETTING menu.
Language
The on screen display language is set to English and can
be changed.
Audio Language
Audio Language is the language certain items are played
in, depending on availability.
Press the button to select the Audio Language. Press
the OK button to the sub menu, then use the
buttons to select either Primary or Secondary then press
the
button.
Select your preferred language from the selection using
the
buttons, press the OK button to confirm.
Press the MENU button to return to the SETTING menu.
Subtitle Language
Subtitle Language is the language certain items are
played in, depending on availability.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Press the button to select the Audio Language. Use the
buttons to select either Primary or Secondary then
press the button.
Select your preferred language from the selection using
the
buttons, press the OK button to confirm.
Press the MENU button to return to the SETTING menu.
Hearing Impaired
Shows additional information for people with impaired
hearing when switched on (if supported by the
broadcaster). Use the button to select Hearing Impaired
then use the
OK
button to switch On or Off.
Blue Screen
Blue screen is used when there is no signal or during a
weak signal.
Use the button to select Blue Screen then use the OK
button to switch On or Off.
PVR File System
Use the button to select PVR File System then press the
OK button to open the PVR File System submenu.
Select Disk: Lets you select the USB drive you wish to
check using the buttons. You can then select which
disk to check using the buttons.
Timeshift Size: This lets you choose the amount
of memory the Timeshift function can use on a
connected USB device. Choose between 512MB / 1GB
/ 2GB / 4GB using the
buttons.