Bush FVPZAPPER100, Instruction Manual

Page: 27 / 41

B ro a d b a n d I S P
connection
A Wireless-N router (IEEE 802.11a/b/g/n) with simultaneous
2.4 and 5 GHz bands is designed to increase bandwidth.
These are optimized for smoother and faster HD video
streaming, file transfers and wireless gaming.
• The frequency and channel differ depending on the
area.
• The transmission speed differs depending on the
distance and number of obstructions between the
transmission products, the configuration of these
products, the radio wave conditions, the line traffic and
the products that you use. The transmission may also
be cut off or may get disconnected depending on the
radio wave conditions, DECT phones or any other WiFi
11b appliances. The standard values of the transmission
speed are the theoretical maximum values for the
wireless standards. They are not the actual speeds of data
transmission.
• The location where the transmission is most effective
differs depending on the usage environment.
• The Wireless feature of the box supports 802.11 a,b,g & n
type modems. It is highly recommended that you should
use the IEEE 802.11n communication protocol in order to
avoid any possible problems while watching videos.
• You must change your modem’s SSID when there are
any other modems around with the same SSID. You can
encounter connection problems otherwise. Use a wired
connection if you experience problems with a wireless
connection.
Configuring Wireless Device Settings
Open the Network/Internet Settings menu and select
Network Type as Wireless Device to start connection
process.
The box will scan the wireless networks automatically. A list
of available networks will be displayed. Please select your
desired network from the list.
Note: If the modem supports N mode, you should set
N mode settings.
If the selected network is protected with a password,
please enter the correct key by using the virtual keyboard.
You can use this keyboard via the directional buttons and
the OK button on the remote control.
Wait until the IP address is shown on the screen.
This means that the connection is now established. To
disconnect from a wireless network, highlight Network
Type and press Left or Right buttons to set as Disabled.
Highlight Internet Speed Test and press the OK button to
check your internet connection speed. Highlight Advanced
Settings and press the OK button to open the advanced
setting menu. Use directional and numeric buttons to set.
Press the OK button to save settings when complete.
Other Information
The status of the connection will be displayed as
Connected or Not Connected and the current IP address,
if a connection is established.
Connecting to your mobile device via WiFi
• If your mobile device has WiFi feature, you can connect
it to your box via a router, in order to access the content
in your device. For this, your mobile device must have an
appropriate sharing software.
• Connect to your router following the steps stated above
in the Wireless Connectivity section.
• Afterwards, engage your mobile device with the router and
then activate the sharing software on your mobile device.
Then, select files that you want to share with your box.
• If the connection is established correctly, you will be able
to access the shared files from your mobile device via the
Media Browser of your box.
• Enter the Media Browser menu and the playback device
selection OSD will be displayed. Select your mobile device
and press the OK button to continue.
Connectivity Troubleshooting
Wireless Network Not Available
• Ensure that any firewalls of your network allow the box
wireless connection.
• Try searching for wireless networks again, using the
Network/Internet Settings menu screen.
If the wireless network does not function properly, try
using the wired network in your home. Refer to the
Wired Connectivity section for more information on
the process.
If the box does not function using the wired connection,
check the modem (router). If the router does not have a
problem, check the internet connection of your modem.
Advanced features
Getting the most from your set-top-box
Advanced features 26
If you require any technical guidance or find that your set-top box is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,