Bush FVPZAPPER100, Instruction Manual

Page: 11 / 41

Connections
FRONT VIEW
FVPZAPPER100
1. On / Off
2. Channel Down
3. Channel UP
4. USB INPUT: To connect USB storage devices for media playback
BACK VIEW
12V
5V 50 mA
ETHERNET
ANALOG A/V
OUTPUT
ANTENNA OUT
5. ANALOG A/V OUTPUT: Analog Audio/Video Output
6. ANTENNA IN : Aerial input
7. ANTENNA OUT: To watch channels on the TV.
8. HDMI OUTPUT : HDMI output connection
9. Optical Audio Out: You can use this connector to output the digital audio to an external sound device. Refer to your
sound system instruction book for further information.
10. LAN: Ethernet Input.
11. POWER INPUT : DC IN (12V) power connection.
Make sure that you connect all cables and connections before you plug the units adaptor into the mains supply. After you
connect the unit to the mains supply, the LED light located on the front panel will be red (Standby mode).
1 2 3
4
5 6 7 8 9 10
11
Getting to know your set-top box
You’ll be up and running in no time
Getting to know your set-top box
10
If you require any technical guidance or find that your set-top box is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,