For any help concerning set up and use of your TV please call the
Customer Helpline: 0845 604 0105
14
Connections
Using headphones
• Turn down the volume before connecting
headphones to the unit, then adjust the volume
to your desired level.
• When headphones are connected, no sound will
come from the front speakers.
Earphones /
Headphones
(1/8” [3.5mm]
diameter plug)
Maximum output
voltage ≤150mV
CAUTION:
Excessive sound pressure from earphones and
headphones can cause hearing loss.
SCART
CABLE
If your VCR permits, then connect your antenna
to your VCR and VCR RF to your TV
TV
AERIAL
Connecting to sources with scart
Devices with RGB output must be connected to
the SCART input:
Connects the SCART from the source to the
corresponding SCART on this unit (SCART cable
not included) as shown.
Make sure you connect both to SCART to
SCART.
To operate the connected device and play the
source, first press the
FUNCTION
or
AV
button
to select the AV2/SCART mode.
To AUDIO /
VIDEO IN jacks
(AV IN 1)
To AUDIO / VIDEO OUT jacks
To connect to A/V devices such as a VCR,
camcorder or video game system.
Connect the AUDIO / VIDEO cable (not included)
as shown.
Make sure you connect the cable from the other
equipment (
AUDIO
and
VIDEO OUT
) to this unit
(
AUDIO
and
VIDEO IN
). Press the
FUNCTION
or
AV
button to select AV1 mode.
Note:
Please refer to the user manual for the other
equipment for more information.
Connecting to devices with a composite
BTVD9xxx6_IB_BUSH 2011_Rev3.indd 14
6/1/2011 16:27:35