For any help concerning set up and use of your TV please call the
Customer Helpline: 0845 604 0105
11
Using the Remote Control
• Point the remote control at the REMOTE
SENSOR located on the unit.
• When using this unit in a very brightly lit area,
the infrared REMOTE CONTROL SENSOR may
not work properly.
• The recommended effective distance for using
the remote control is about 16 feet (5 metres).
To Change the Remote Control Batteries
•
Open the battery door.
(fig.
1a
)
•
Insert two “AAA” batteries.
(fig.
1b
)
Battery Replacemen
t
When the batteries become weak, the operating
distance of the remote control will be greatly reduced
and you will need to replace the batteries.
Note:
• If the Remote Control is not to be used for a
long time, remove the batteries to avoid damage
caused by battery leakage corrosion.
• Do not mix old and new batteries. Do not mix
ALKALINE, standard (CARBON-ZINC) or
rechargeable (NICKEL-CADMIUM) batteries.
• Corrosion, oxidation, battery-leakage and any
other gradually acidic defect of this nature will
invalidate the guarantee.
• When discarding batteries, environmental
problems must be considered and local rules or
laws governing the disposal of these batteries
must be strictly followed.
CAUTION:
Danger of explosion if batteries are incorrectly
replaced. Replace only with the same or
equivalent type.
WARNING:
• Do not dispose of batteries in a fire or
they may leak and/or explode.
• The battery shall not be exposed to
excessive heat such as sunshine, fire or
the like.
Remote control
Getting Started
fig.
1a
fig.
2b
BTVD9xxx6_IB_BUSH 2011_Rev3.indd 11
6/1/2011 16:27:34