Bush BD-1801, Instruction Manual

Page: 19 / 23

Other information
Helpful technical information
Other information
Other information 36
37
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Other information
Helpful technical information
Software version
You can check the software version of your radio.
With your radio switched on (not in Standby mode):
1. Long press the Menu button to enter the menu options
2.
Use the Tune/Select control to scroll to <System>. Press to Select.
3. Use the Tune/Select control to scroll to <SW Version>. Press to Select. The software
version will be displayed.
Factory reset
You can reset your radio and restore all of the original factory settings.
Note: If you reset your radio all of your stored station presets will be deleted and any
connected Bluetooth device will be unpaired.
With your radio switched on (not in Standby mode):
1.
Long press the Menu button to enter the menu options
2. Use the Tune/Select control to scroll to <System>. Press to Select.
3. Use the Tune/Select control to scroll to <Factory reset>. Press to Select. Factory
Reset? Yes <No> will be displayed.
4.
Use the Tune/Select control to scroll to <Yes>. Press to Select.
5. Restarting... will be displayed. After a few seconds the display will change to Welcome
to Digital Radio and will then go to Standby mode. When you next power on your
radio from Standby mode and select DAB mode, it will begin an automatic scan for
DAB stations. A progress bar will show the progress of the scan and the number of
stations found during the scan will also be displayed. When the scan is complete
your radio will select the first available station and begin to play. Stations are listed in
numerical and then alphabetical order by default.
Technical specification
Power adaptor. Output DC 6V 1A
Input AC 100-240V, 50/60Hz
Batteries: 4 x 1.5V C size (LR14)
(Optional, not supplied)
Audio output: 1 x 3W RMS
Frequency range:
DAB: Band III, 174 MHz to 240 MHz
FM: 87.5 MHz to 108 MHz
Bluetooth: 2.4GHz-2.480GHz
Pairing name: BUSH BD-1801
Profiles HFPV1.5, A2DPV1.2, AVRCPV1.4, GAVDP1.2