5
Customer Helpline
0845 600 4632
Installation
Customer Helpline
0845 600 4632
Positioning
Make sure the there are no combustible or
1.
fl ammable materials, such as curtains, in the
vicinity of the installation.
Furniture and cabinets surrounding the
2.
oven must be of material resistant to
temperatures of greater than 50°C.
Surrounding furniture, cabinets and the
3.
extractor fan should be positioned in
accordance with fi gure 1.
There must be at least 2cm of free space
4.
between the back wall and the rear of the
appliance to allow for suffi cient ventilation
and air circulation.
If fi tted, the extractor fan must be at least
5.
65cm above the hob. If no fan is fi tted the
minimum distance between the hob and
any cabinet or other structure must be
70cm.
Feet height adjustment
The height and level of the appliance can be
1.
adjusted by rotating the feet located under-
neath the appliance at each corner as shown in
fi gure 2.
Rotate in a clockwise direction to decrease
2.
the height and anti clockwise to increase the
height.
Once the desired level has been achieved, lift
3.
the appliance into its location.
Do not
drag it as
this may cause damage to your fl oor and the
appliance.
See Detail A
Detail A
Positioning & electrical connection
Figure 1
Figure 2
EXTRACTOR FAN
