Bush 487/6474, Instruction Manual

Page: 27 / 48

27
Using your Outdoor DAB Radio
Let’s get started
Using your Outdoor DAB Radio
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021 .
Audio mode
The radio will automatically switch between Stereo and Mono, depending on the quality
of the signal being received but you can override this function and manually switch
between Stereo and Mono.
1. Press and hold the Menu/Info button until FM <Scan setting> is displayed.
2. Use the Tune control to scroll to <Audio setting>. Press and release the Enter button.
There are now two different options of ‘Forced mono’ and ‘Stereo allowed’ and the
current setting will have an ‘*’ in the top right of the display.
3.
Use the Tune control to choose from the two options available. Press and release the
Enter button to confirm.
Storing an FM station preset
Your Radio can store up to 10 FM radio stations in its preset memories for instant access to
your favourite stations.
1.
Tune the Radio to the FM radio station that you wish to preset.
2. Press and hold the Preset button for approximately 2 seconds until Preset Store
<1:(Empty)> is displayed.
3. Use the Tune control to move to the preset location that you would like to store the
radio station to (1-10).
4. Press and release the Enter button, the display will confirm Preset X stored, where ‘X’ is
the number of the preset (1-10).
Note : If there is already an existing FM station stored under a preset, it will be over
written when you store the new station.