Bush 487/6474, Instruction Manual

Page: 17 / 48

17
Getting to know your Outdoor DAB Radio
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021 .
Getting to know your Outdoor DAB Radio
You’ll be up and running in no time
Initial set-up
1.
Press and release the Standby button on the top of your radio. Your radio will switch
on and begin an automatic scan for DAB stations. A progress bar will show the
progress of the scan and the number of stations found during the scan will also be
displayed.
2.
When the scan is complete your radio will select the first available station and begin to
play. Stations are listed in numerical and then alphabetical order by default.
Note:
The DAB radio station list is stored in the memory and so the next time you
switch your radio on, the station search does not take place. It is possible to scan
manually for stations by pressing and releasing the Scan button.
3. Turn and release the Tune control to scroll through the available stations in the station
list.
4. When the station that you would like to listen is displayed, press and release the Enter
button to select. There will be a short delay whilst your radio tunes to your selected
station.
Adjusting the volume
The volume is a ‘jog’ control. Please turn it to the ‘stop’ and then release. To progressively
increase or decrease the volume, turn it to the ‘stop’ and then hold.
Turn clockwise to increase the volume.
Turn anti-clockwise to decrease the volume.
Check the display, which will confirm the volume setting.
Time and date
The first time you listen to DAB radio, the time and date of your product will be
synchronised automatically to that broadcast by the DAB service in 24 hour mode; which
is in line with daylight saving, so there is no need to set the time and date manually.