background image

24

Problem

Solution

The function buttons do 
not respond:

• 

Check that mains power wall socket is switched on 
and that the Micro is not in Standby mode. 

• 

Check that you are trying to use the function buttons 
for the mode that you are in. 

• 

Unplug the mains power. Leave the Micro for 3 
minutes and then reconnect the power.

CD does not play:

• 

Check that you are in CD mode. Press and release 
the ‘Mode’ button on the Micro or on the remote 
control to change the mode (check the display).

• 

Take out the CD and check that it is not marked or 
scratched.  Damaged CDs cannot be played in the 
Micro or may skip or not rotate correctly.

• 

Please check that you are using an original audio CD 
and not a copy.  Often copied CDs will not play.

Unable to pair with a 
Bluetooth device:

• 

Check that you are in Bluetooth mode. Press and 
release the ‘Mode’ button on the Micro or on the 
remote control to change the mode (check the 
display). 

• 

Ensure that you are within range of the Micro for 
Bluetooth functionality, 10 metres or less (33 feet or 
less).

• 

Move the Micro and Bluetooth device away from 
other Bluetooth devices/electrical equipment. 

• 

If possible, turn off other nearby Bluetooth devices or 
disable their Bluetooth functionality.

Summary of Contents for 426/9665





























Reviews: