Bush 426/9665, Instruction Manual

Page: 15 / 28

15
There are now two different options to choose from and the current setting will
have an ‘*’ next to it.
• Strong stations
The scan will only stop when a strong signal strength is received which should also
result in a better audio quality.
It is possible that the station you are scanning for may be missed using this option.
• All stations
The scan will stop for every station it receives, even if the signal strength is poor.
2. Use the and buttons on the Micro or on the remote control to move to
and choose from the two options available. Press the rotary control on the Micro
to ‘Select’ or the ‘Select’ button on the remote control to confirm.
3. Press and release the ‘Menu’ button to exit the Menu.
Audio mode
The radio will automatically switch between Stereo and Mono, depending on the
quality of the signal being received but you can override this function and manually
switch between ‘Stereo’ and ‘Mono’.
Note: You may wish to select ‘Stereo’ if you are listening to your Micro using
headphones.
1. Press and hold the ‘Menu’ button on the Micro or on the remote control. Use the
and buttons on the Micro or on the remote control to move to
<Audio setting>. Press the rotary control on the Micro to ‘Select’ or the ‘Select’
button on the remote control.
There are now two different options of ‘Forced mono’ and ‘Stereo allowed’ and the
current setting will have an ‘*’ next to it.
2. Use the and buttons on the Micro or on the remote control to move to
and choose from the two options available. Press the rotary control on the Micro
to ‘Select’ or the ‘Select’ button on the remote control to confirm.
3. Press and release the ‘Menu’ button to exit the Menu.
Storing an FM station preset
Your Micro can store up to 10 FM radio stations in its preset memories for instant
access to your favourite stations.
1. Tune the Micro to the FM radio station that you wish to preset.
2. Press and hold the button on the Micro or the ‘Prog.‘ button on the remote
control for approximately 2 seconds until ‘Preset store’ is displayed.
3. Use the and buttons on the Micro or on the remote control to move to
the preset location that you would like to store the radio station to (1-10).