Bush Palace
Flamingo
Setup Guide
© 2017 Bush Palace Camper Hire
8
FITTING THE DOOR
•
With the door closed, remove clear protector and place under seat cushion for storage
•
Lower the door top section from the roof and place it onto the locating pins next to the lower
door.
•
Lock the top of the door in place using the two wing nuts at the hinge, then clip the two door
sections together using the latch at the top of the lower section.
•
Unclip the door from the door frame.
•
Secure the camper walls to door frame using Velcro inside & out
MISCELLANEOUS SETUP
•
Turn fridge on (switch under table)
•
Using the poles and guy ropes from the side boot set up the privacy screens if required,
securing the bottom of the screen to the clips on the poles and on the camper
•
Connect the black 25mm silage hose to the barbed connector under the camper just in front of
the r/h wheel (if you can't find it run the tap and look for the water coming out!)
•
Fit the 12v light/fans to the bed roof support pole and plug into socket on main light
Door stored in roof
Upper door frame connected to lugs on
camper body
Butterfly clips at top of door
Lower & upper door clip
Butterfly clip on door frame
Lower & upper door clip