Bush Palace
Flamingo
Setup Guide
© 2017 Bush Palace Camper Hire
12
AWNING
You should have unzipped the awning from its bag and undone the ties when raising the roof, so
the awning is hanging down in front of the camper. If you didn’t, do that now. To set up the
awning:
•
Connect roof rafters (x4) to camper roof brackets and clip ends onto main awning pole
•
Clip upright poles (x3) onto main awning pole
•
Clip two upright poles (on on either side) to end rafters
•
Adjust height of all poles
•
Velcro awning around riser arms and roof rafters
•
Attach guy ropes to all upright poles and peg to ground
ANNEX WALLS
The annex walls are an optional hire item. They fully enclose the awning and add a great additional
internal space to the Flamingo. You can also add a couple of camp stretchers to increase the capacity
of the camper to 7.
To set up:
•
Attach draught skirt using press studs and sail track on camper and peg down
•
Zip front wall & rear wall on
•
Velcro awning walls around riser arms
•
Velcro bottom of walls to draught skirt
•
Zip long wall on
•
Velcro upright poles to awning walls
•
Zip front and rear side awning walls to long awning wall.
•
Peg walls to ground
