Bush Hog XLRR1022-I, Operator'S Manual

Page: 64 / 82

OPERATION
XLRR-I 05/21 Operation Section 4-22
© 2021 Alamo Group Inc.
O
PE
R
AT
IO
N
Stop the tractor engine and remove the key.
Remove the transport safety (B) arm only on the side on which you want to work.
Lock the transport safety arm in the resting position (horizontal).
Install the retaining pin (C) and washer (D).
Close the cock valve (A) on the side where you do not want work
Get back on the tractor and lower the hay rake arm
with the hydraulic cylinder.
On the side where you have left the transport arm the
hay rake arm will remain raised.
Once the arm has gone over center, place the tractor hydraulics into the float position, allowing the rake arms
to finish lowering
The machine is ready to work on one side only.