BUSCH SECO SD 1005 C, Installation And Operating Instructions Manual

Page: 14 / 20

EU Declaration of Conformity
This Declaration of Conformity and the CE-mark affixed to the nameplate are valid for the machine within the
Busch scope of delivery. This Declaration of Conformity is issued under the sole responsibility of the manufacturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery
(this can be the operating company, too) must conduct the conformity assessment process for the superordinate
machine or plant, issue the Declaration of Conformity for it and affix the CE-mark.
The manufacturer
declares that the machine(s)
fulfil(s) all the relevant provisions from European directives:
– ‘Machinery’ 2006/42/EC
– ‘Electromagnetic Compatibility’ 2014/30/EU
– ‘RoHS’ 2011/65/EU Restriction of the use of certain hazardous substances in electrical and electronic equip-
ment (incl. all related applicable amendments)
and comply(-ies) with the following designated standards that have been used to fulfil those provisions:
Standard Title of the Standard
EN ISO 12100 : 2010 Safety of machinery - Basic concepts, general principles of design
EN ISO 13857 : 2019 Safety of machinery - Safety distances to prevent hazard zones being reached
by the upper and lower limbs
EN 1012-1 : 2010
EN 1012-2 : 1996 + A1 : 2009 Compressors and vacuum pumps - Safety requirements - Part 1 and Part 2
EN ISO 2151 : 2008 Acoustics - Noise test code for compressors and vacuum pumps - Engineering
method (grade 2)
EN 60204
-1
: 201
8
Safety of machinery - Electrical equipment of machines - Part 1: General re-
quirements
EN IEC 61000-6-2 : 2019 Electromagnetic compatibility (EMC) - Generic standards. Immunity for indus-
trial environments
EN IEC 61000-6-4 : 2019 Electromagnetic compatibility (EMC) - Generic standards. Emission standard
for industrial environments
EN ISO 13849-1 : 2015
(1)
Safety of machinery - Safety-related parts of control systems - Part 1: General
principles for design
(1)
In case control systems are integrated.
Legal person authorized to compile the technical file
and authorized representative in the EU
(if the manufacturer is not located in the EU): Busch Dienste GmbH
Schauinslandstr. 1
DE-79689 Maulburg
Busch Výroba CZ s.r.o
Svárovská 620
CZ 460 01, Liberec 11
Liberec, 1
4.
05.20
21
Michael Dostálek , General Director
SECO SV 1005 C / SD 1005 C / SV 1008 C / SD 1008 C