Spare Parts
Note
please always quote the type (“Type”) and the serial no. (“No”) of the
compressor. This will allow Busch service to check if the compressor is
compatible with a modified or improved part.
The exclusive use of genuine spare parts and consumables is a pre-
requisite for the proper function of the compressor and for the grant-
ing of warranty, guarantee or goodwill.
Your point of contact for service and spare parts in the United
Kingdom:
Busch (UK) Ltd.
Hortonwood 30-35
Telford
Shropshire
TF1 7YB
Tel:
01952 677 432
Fax:
01952 677 423
Your point of contact for service and spare parts in Ireland:
Busch Ireland Ltd.
A10-11 Howth Junction Business Centre
Kilbarrack, Dublin 5
Tel:
+353 (0)1 8321466
Fax:
+353 (0)1 8321470
Your point of contact for service and spare parts in the USA:
Busch lnc.
516-B Viking Drive
Virginia Beach, VA 23452
Tel:
1-800-USA-PUMP (872-7867)
Your point of contact for service and spare parts in Canada:
Busch Vacuum Technics Inc.
1740, Boulevard Lionel Bertrand
Boisbriand (Montréal)
Québec J7H 1N7
Tel:
450 435 6899
Fax:
450 430 5132
Your point of contact for service and spare parts in Australia:
Busch Australia Pty. Ltd.
30 Lakeside Drive
Broadmeadows, Vic. 3047
Tel:
(03) 93 55 06 00
Fax:
(03) 93 55 06 99
Your point of contact for service and spare parts in New Zealand:
Busch New Zealand Ltd.
Unit D, Arrenway Drive
Albany, Auckland 1311
P O Box 302696
North Harbour, Auckland 1330
Tel:
0-9-414 7782
Fax:
0-9-414 7783
Find the list of Busch companies all over the world (by the time of the
publication of these installation and operating instructions) on
page 16 (rear cover page).
Find the up-to-date list of Busch companies and agencies all over the
world on the internet at
www.busch-vacuum.com
.
Pos.
Part
Qty
Part no.
72
Venting valve (=oil fill plug)
with seal ring
1
0543 107 407
76
Sight glass
1
0583 000 001
77
Seal ring for sight glass
1
0480 000 271
80
Plug
1
0415 000 006
81
Seal ring
1
0484 000 046
82
Seal ring for plug with magnet
1
0482 137 352
510
Flexible coupling, complete
1
0510 118 749
714
Inlet flange, lower part, with
non-return valve (MI 1352 BV)
1
0916 000 670
714
Inlet flange, lower part, with
non-return valve (MI 1502 BV)
1
0916 000 672
715
Screen (MI 1352 BV)
1
0534 000 041
715
Screen (MI 1502 B
P
)
1
0534 000 0
8
4
—
Filter cartridge, paper, for inlet
filter (MI 1352 BV)
1
0532 000 005
—
Filter cartridge, paper, for inlet
filter (MI 1502 BV)
1
0532 000 006
Spare Parts Kits
Spare parts kit
Part no.
Overhaul kit (incl. set of seals, marking “VT”
and “DT”)
0993 120 489
Set of seals (marking “DT”)
0990 120 487
Oil
Denomination
Busch VS 150
ISO-VG
Base
PAO
Density [g/cm³]
0.846
Kinematic viscosity at 40 °C
[mm²/s]
150
Kinematic viscosity at 100 °C
[mm²/s]
19.8
Flashpoint [°C]
236
Pourpoint [°C]
–54
Part no. 1 l packaging
Filling quantity, approx. [l]
0.6
MI 1502 BP
Spare Parts
0870152627 / 101117
page 13
: When ordering spare parts or accessories acc. to the table below
150
0831 164 883
