GB
144
6.8 to program Intermediate Position
You can program an intermediate position which is com-
piled from the DOWN travel time (L = operating time) and
reverse travel pulse (U = reversing time). This intermediate
position will
always only be activated if an UP command
(3 minutes) is previously executed. The subsequent DOWN
travel command (extension, time program, or manual op-
eration) uses the programmed time.
• In one of the three modes of operation, hold the
•
push-
button down for three seconds.
l
3:00
• Press the
or
pushbutton to set the desired operat-
ing time.
• Press the
JA
pushbutton to confirm the operating time
set.
Programming
The current operating time appears
in the display.
Summary of Contents for 6412-101
