GB
139
Programming
6.6 Further functions for blinds control II
If a sun sensor is connected to the blind control, you can
change, or switch off, the values for the sun protection and
dusk function in the operating element.
The light sensor constantly executes measurements and
transmits the ACTUAL value to the operating element
- ACTUAL value
= bar display ( : 15 to 300 lux )
( : 5000 to 50,000 lux )
- SETPOINT value
= digital display
- 1 bar
= digital display 1(= dark)
6.6.1 Sun protection function
Please refer to the Operating Instructions for the flush-
mounted insert for a description of the sun protection
function.
The values are allocated as follows:
- value from 1–9:
( 5000 to 50,000 lux )
- "OFF"
no sun protection function
If the set sun value is exceeded, the symbol
blinks in the
display.
Summary of Contents for 6412-101
