GB
125
Programming
6.2.2.2 To switch over from "1-day timer" to "7-day timer"
• Press the
NEIN
pushbutton three times.
• Press the
JA
pushbutton once to confirm what you have
chosen.
1 2 3 4 5 6 7
• Press the
NEIN
pushbutton repeatedly until the desired
weekday (e.g., 3 = Wednesday) is shown in the display
(figure on the right!)
• Press the
JA
pushbutton to confirm the input.
You now have the opportunity to put in a date to activate the
astro function. If you do not want to do this, press the
NEIN
pushbutton once and then press the
JA
pushbutton repeat-
edly until the mode of operation set again appears in the
display. The operating element is now ready for operation
as "seven-day timer". The switching times of the "seven-
day timer" will be taken over as daily switching times.
Refer to 6.2.1.3 to activate the astro function.
3
Summary of Contents for 6412-101
