GB
Programming
NOTE
Programming can be terminated at any point by pressing
pushbutton
C
. After 3 minutes have elapsed, the thermo-
stat automatically displays the "actual" time and continues
to operate according to the set values.
Programming example:
In this case, the low temperature, as well as the starting
times of the first high-temperature and the first low-
temperature period on working days, are to be changed;
the settings for non-working days are to remain unchanged.
Program as follows:
• Press pushbutton
C
and
- the actual time will be displayed.
• Press pushbutton
C
again
- the actual working day will be displayed.
• Press pushbutton
C
again
• set the low temperature via the
+
/
-
pushbuttons
- the new low temperature, e.g., 13
°
C, will be displayed.
• Press pushbutton
C
again
- the symbol A and the working day will be displayed.
Summary of Contents for 1080U
