GB
If you wish to have different values (s. also chapter "Start-
up"), thermostats 1080 U/1080 UF are programmed in the
following order (settings ex Works are shown in brackets):
- Low temperature
(15
°
C)
on working days
- Starting time of 1st high-temperature period (06:00)
- Starting time of 1st low-temperature period (22:00)
- Starting time of 2nd high-temperature period (00:00)
- Starting time of 2nd low-temperature period (00:00)
on non-working days
- Starting time of 1st high-temperature period (06:00)
- Starting time of 1st low-temperature period (22:00)
- Starting time of 2nd high-temperature period (00:00)
- Starting time of 2nd low-temperature period (00:00)
The following steps must be followed in order to program
each individual setting
:
• Press pushbutton
C
and
• set the new values via the
+
/
-
pushbuttons
- the values/indications in the display will be updated.
• Press pushbutton
C
to terminate programming.
Programming
Summary of Contents for 1080U
