R
en
The Elcometer 270 generates a voltage which is used to test for holes in a coating
applied to a metal surface. Should a user make contact with the wand while holding the
earth signal return lead, a very mild shock may be experienced with the higher voltage
settings. The current capability of the detector is low and the health risk directly from the
voltage is negligible.
This product meets the Electromagnetic Compatibility and Low Voltage Directives.
The product is Class B, Group 1 ISM equipment according to CISPR 11.
Group 1 ISM product: A product in which there is intentionally generated and/or used conductively
coupled radio-frequency energy which is necessary for the internal functioning of the equipment itself.
Class B product are suitable for use in domestic establishments and in establishments directly connected
to a low voltage power supply network which supplies buildings used for domestic purposes.
is a registered trademark of Elcometer Limited. All other trademarks acknowledged.
A Material Safety Data Sheet for the Wetting Agent (Kodak Photo-Flo™) supplied as an accessory for the
Elcometer 270 is available to download via our website:
www.elcometer.com/images/MSDS/elcometer_270_wetting_agent.pdf
© Copyright Elcometer Limited. 2009-2013. All rights reserved. No part of this Document may be
reproduced, transmitted, transcribed, stored (in a retrieval system or otherwise) or translated into any
language, in any form or by any means (electronic, mechanical, magnetic, optical, manual or otherwise)
without the prior written permission of Elcometer Limited.
A copy of this Instruction Manual is available for download on our Website via www.elcometer.com.
Doc.No. TMA-0265 Issue 07
Text with Cover No: 18064
270
Pinhole Detector
2 of 15
For more information
/ 1300 287 935
[email protected] / www.burwell.com.au
