USER INSTRUCTIONS - FIREBRAND
ABOUT THE LOCK
How to open the safe
• Press the [*] key
• Enter a valid 4-6 digit code (the factory default is ‘123456’)
• Press the [ENTER] key
• While the green LED is flashing, turn the handle counter clockwise until
it stops and open the safe door
This lock requires a 4-6 digit code to open the
lock. You can have 2 different codes on this lock,
the master code and the secondary code. The
secondary code must be activated, you will need
the master code to activate the secondary code.
The master code can’t be deleted but you can
remove the secondary code.
Incorrect entry
• An incorrect code entry will be followed by a red LED flash and 3
acoustic signals
• After 3 wrong entries, a penalty period of 5 minutes will begin; this is
indicated by the red LED flashing every 5 seconds
• After the 5 minute penalty time, you can try again
How to close the safe
• Ensure that the bolts are fully retracted (if necessary rotate the handle
clockwise to retract the bolts)
• Gently push the door shut. Always ensure that there are no objects or
people in the way of the closing door
• Turn the handle clockwise until the stop position is reached
Changing the master code
• Press the [*] key
• Press the [ENTER]
• Press key [1] followed by the [ENTER] key
• Enter the existing 4-6 digit master code followed by the [ENTER] key
