Burstner Ixeo Time IT 590, Instruction Manual

Page: 88 / 274

88
T-Modell - 17/18 - Ausgabe 09/17 - 2891569 - BUE-0029-19EN
Living
6
6.13.2 Suspension table
Table leg The table leg can be set up at two different heights:
z
Normal table height
z
Decreased table height (when converting to a bed foundation)
To lower the table, there are the following possibilities (depending on model):
z
Replacing the long table leg with a short one
z
Folding in one part of the table leg
z
Removing one part of the table leg
Table top Depending on the model, the table top can be extended.
Expanding the table:
„
Pull the knob (Fig. 110,3) of the lock down and swing out the table exten-
sion (Fig. 110,2).
Reducing the table size:
„
Swing the table extension (Fig. 110,2) under the table top (Fig. 110,1) until
the lock latches in place audibly.
Conversion to bed
foundation:
„
Lift the front of the table top by approx. 45°.
„
Depending on the model, shorten the table leg to the conversion level.
„
Release the lock (Fig. 111,1) on the table top.
„
Take the table top out of the upper retainer.
„
Hook the table top at a 45° angle to the supports into the lower retainer and
place on the floor with the shortened table leg.
„
Lock the table top.
Fig. 110 Swing-out table extension
Fig. 111 Lock