RESISTOMAT
®
Model 2302-V001
Page 54
Introduction &
applications
Description of functions
Brief guide
Operation
Calibration
Test and offset
instructions
RS232 data
output
Accessories and Circuit diagram
30 mm
l
A = 20 mm, B = 11 mm,
l
= 255 mm
B
A
Which KELVIN connecting cable fits which RESISTOMAT
®
?
Check the following table:
Model
2302 / 2304 / 2305
2329
2318 / 2319 / 2323
2385-V001
2385-V020
2386-V001
Probe
2387-V001
2387-V020
Order Information
Kelvin test tongs
model 2385-V001
Kelvin test tongs
model 2385-V020
Kelvin test tongs
model 2386-V001
Kelvin test probe
model 2387-V001
Kelvin test probe
model 2387-V020
Tongs
Kelvin Test Tongs ;odel 2386-V001
These test tongs are used for the measurement of ohmic
resistances in test bays of cable drums ready for dispatch as
well as various test samples in production plants or test
laboratories.
When using different profiles in the contacting unit it is
possible to make contact on test sample cross-sections
from 1 to 1000 mm
2
. The opening angle of the tongs and the
form of the contacting profiles also permit special applications
such as measurement on heavy duty transformers. The
fitted supply leads are 10 m long with banana plugs.
Designs
Kelvin Test Tongs Model 2385-V001
These test tongs are ideal for resistance tests on small components and
are gold-plated which helps to retain lower contact resistance. The
supply leads are 3 m long and fitted with banana plugs at the end.
Kelvin Test Tongs Model 2385-V020
As model 2385-V001, however fitted with a 5-pin connector (suitable for
RESISTOMAT
®
model 2329) 3 m length.
95 mm
Kelvin Test Probe Model 2387-V001
These were specially designed for contacting low-impedance
test samples where contacting with test tongs is not possible
(countersunk terminal lugs on electro motors, conductivity
measurements on printed conductors, for example). The
points are made of hardened steel, guaranteeing a long
service life. The supply leads are 3 m long and fitted with
banana plugs at the end.
Kelvin Test Probe Model 2387-V020
As type 2387-V001, however fitted
with a 5-pin connector
(suitable for RESISTOMAT
®
model 2329).
Accessories and Circuit diagram
