burster Italia s.r.l. · Sede legale ed operativa · Via Cesare Battisti, 16/18 · 24035 Curno (BG) · Tel. +39 035 618120 · Fax +39 035 618250
e-mail: [email protected] · http://www.burster.it
C.F. e P.IVA 11048400151 · Capitale sociale Euro 49.920,00 · R.E.A. di Bergamo 276749
Apparecchi di misura di precisione. Sensori e Sistemi
per grandezze elettriche, termiche e meccaniche
1
Read First
1.1
Safety and Caution Symbols
Caution:
Injury risk for persons
Damage of the device is possible.
Note:
Important points to be considered.
1.2
Intended Use
burster
devices may only be used for measurement tasks and the directly related control tasks. Any
other use is considered improper. The torque sensors are not safety components in the sense of the
intended use. The sensors need to be transported and stored appropriately. The assembly,
commissioning and disassembling must take place professionally.
1.3
Dangers
The torque sensor is fail-safe and corresponds to the state of technology.
1.3.1 Neglecting of Safety Notes
At inappropriate use, residual dangers can emerge (e.g. by untrained personnel). The operation manual
must be read and understood by each person entrusted with the assembly, maintenance, repair,
operation and disassembly of the torque sensor.
1.3.2 Residual Dangers
The plant designer, the supplier, as well as the operator must plan, realize and take responsibility for
safety-related interests for the sensor. Residual dangers must be minimized. Residual dangers of the
torque measurement technique must be pointed out.
Human mistakes must be considered. The construction of the plant must be suitable for the avoidance of
dangers. A danger-analysis for the plant must be carried out.
1.4
Reconstructions and Modifications
Each modification of the sensors without our written approval excludes liability on our part.
1.5
Personnel
The installation, assembly, commissioning, operation and the disassembly must be carried out by
qualified personnel only. The personnel must have the knowledge and make use of the legal regulations
and safety instructions.
.
