background image

2

   

EF675

 User’s Manual

English

Safety Precautions

This section presents important information intended to ensure 
safe and effective use of this product. Please read this section 
carefully and store it in an accessible location.

WARNING:

Shut down your equipment immediately if it produces smoke, a strange 
odor, or unusual noise. Continued use may lead to fire or electric shock.
Immediately unplug the equipment and contact your dealer or a SEIKO 
EPSON service center for advice.

Never attempt to repair this product yourself. Improper repair work can 
be dangerous.

Never disassemble or modify this product. Tampering with this product 
may result in injury, fire, or electric shock.

Be sure to use the specified power source. Connection to an improper 
power source may cause fire or shock.

Never insert or disconnect the power plug with wet hands. Doing so 
may result in severe shock.

Do not allow foreign matter to fall into the equipment. Penetration of 
foreign objects may lead to fire or shock.

If water or other liquid spills into this equipment, unplug the power cord 
immediately, and then contact your dealer or a SEIKO EPSON service 
center for advice. Continued usage may lead to fire or shock.

Do not place multiple loads on the power outlet (wall outlet). 
Overloading the outlet may lead to fire.

Always supply power directly from a standard domestic power outlet.

Handle the power cord with care. Improper handling may lead to fire or 
shock.

Do not modify or attempt to repair the cord.

Do not place any object on top of the cord.

Avoid excessive bending, twisting, and pulling.

Do not place cord near heating equipment.

Check that the plug is clean before plugging it in.

Be sure to push the prongs all the way in. 

If the cord becomes damaged, obtain a replacement from your dealer 
or a SEIKO EPSON service center.

675u_6.book  Page 2  Thursday, November 27, 2003  10:22 AM

Summary of Contents for EF675



















Reviews: