burmeier ECONOMIC III, Instruction Manual, Page: 40 / 56

40
G
EBRAUCHSANwEISUNG
P
FLEGEBETT
ECONOMIC III · I
NSTRUCTION
M
ANUAL FOR
N
URSING
B
Ed
ECONOMIC III
Test protocol of
an inspection of
electro-medical
equipment
according to
DIN EN 62353:
20015-10
Page 1 of 2
Customer / med. Facility / practice:
Address:
Carried out:  Repeat inspection  Inspection prior initial operation
 _____________________________________________  Inspection following repairs / servicing
Equipment type:  Hospital bed ˛ Nursing bed Protection classification:  I ˛ II
Bed type: ECONOMIC III Inventory Number:
Location: Serial Number:
Grade level (IEC60601-2-52):  1  2  3  4  5
Manufacturer: Burmeier GmbH & Co. KG User-specific: none
Testing equipment used (Type / Inventory Number): 1.
MPG Classification: Class I 2.
I. Visual Inspection OK
Not
OK Defect Description
Visual inspection of the electriacl components
Stickers and type plates Presence, legible
Housing of transformer unit / Power adapter damage
Motor housing and lifting rods of motors Correct position, damage
Motor bolt Check that the lock washer is properly in place
Hand switch damage, Foil intact
Motor-, hand switch- and power cables damage, Routing
Plug and plug covering strip of control unit Available, Correct position
Visual inspection of the mechanical components
Stickers and type plates Presence, legible
Safe working load / patient weight Presence, legible
Trapeze pole / socket damage, deformation
Bed frame damage, deformation
Spring wood slats damage, Splinters
Castors damage
Reclining surface damage, deformation
wooden boards damage, Splinters
welded seams Split welded seams
Side rail damage, Splinters
Knurled screws Tight fit
wearing parts such as joints damage
Locking ring of backrest/thigh rest Check that the ring is properly in place
II. Electric measurments according to DIN EN 62353:20015-10 (leakage current, direct)
Proceed as follow: OK
Not
OK Defect Description
1. Plug the power cable into the test socket on the measuring instrument.
2. Connect the measuring instrument probe with an exposed conductive part of the bed frame (screws, etc.)
3. Activate the drive motors by using the hand switch for the duration of the measurement.
4. Start procedures with the measuring instrument
Limit Value
Value of first
measurement
Current actual
value
Result: Bed SK II (Type B) 0,1 mA mA mA