Leakage
Inlet Valve does not work
Clean the filter.
Tighten the nut.
The filter is blocked.
Water supply is closed.
Rubber Washer
Plastic Washer
Nut
Leakage
Incorrect water level
Problem
Solution
Open the water supply
Adjust the Water level correctly as per page
1 & 2
.
Reconnect the Adjustment Rod,
and adjust the water level as per
B
on page
1 & 2
.
The Stop Float has been over
adjusted beyond its operational range.
The Inlet Valve fixing nut
has not been tightened.
Incorrect adjustment.
Water supply is closed.
Reason
Cistern
Pull out the filter from the Inlet valve.
Filter
Insert the filter back into the Inlet valve.
4: Inlet Valve trouble shooting
2: Inlet Valve installation
Inlet Valve
3: Filter cleaning (Please clean periodically)
Clean by rinsing the filter.
Tighten the nut
2 - 7
F
Stop Float
Adjustment
Rod
Locker
To decrease the water level use
a screw driver to adjust the level
of the Stop Float ( as shown ).
The float should be lowered
To increase the water level use
a screw driver to adjust the level
of the Stop Float ( as shown ).
The float should be raised.
Slide the locker to
the "locked" position
Ensure the top surface of
Stop Float is in line with the
top surface of the Float Cup.
Stop Float
Float
cup
Stop Float
Adjustment
Rod
