UŽÍVATEĽSKY MANUÁL MIEŠAČA - MODEL R6167
Strana 24 z 24
Have the foreign substances removed.
-- Lack of or contaminated lubrication grease.
Have lubricating grease applied or replaced.
-- Pressure too high
Use less thrust during the task
(4) Frequent or strong sparks on the commutator.
-- Short circuit on the armature.
Have the armature replaced.
-- Carbon brushes worn out or jammed
Have the carbon brushes checked.
-- Rough running of the commutator.
Have the surface of the commutator cleaned or ground.
For your own safety, never remove parts or accessories of the electric tool during operation.
In case of fault or damage have the electric tool repaired only by a specialist workshop or
by the manufacturer.
10. LABELS ON YOUR TOOL (if any)
V
Volts
Hz
Hertz
Alternating current
W
Watts
n
0
No load speed
/min or
min
-1
Revolutions or reciprocation
per minute
Class II tool
To reduce the risk of injury,
user must read instruction
manual
Wear Ear Protection
Wear Eye Protection
11. ENVIRONMENTAL PROTECTION
Do not dispose of in general household waste. Instead dispose of in an
environmental friendly way, contact your local recycling centre of council
for advice. Please take the care of the environment very seriously.
