Burley ASTUTE G4113, Installation, Servicing & User Instructions

Page: 5 / 28

4
MANUAL CONTROL
1.2 There are 2 control knobs on the appliance. The right hand one controls On/Off and
pilot/main burner. The left hand one is the comfort level thermostat which turns the fire
down once the indicated temperature is reached. If, during use the pilot is alight but the
main burner is not lit, check the thermostat position, if necessary, select a warmer setting.
The range of the thermostat is around 13
o
C – 45
o
C.
Thermostat knob Ignition knob
1.3
To light the fire, first ensure the right hand control (Ignition) knob is turned clockwise to OFF,
and then press the knob for several seconds then turn slowly anticlockwise to the ignition
position. A click will be heard and the pilot should light. If it does not, repeat the operation a
few times to purge any air in the pipes. Continue to hold knob for 15 – 20 seconds to establish
the pilot and then release. If the pilot fails to establish, turn off, wait 1 minute then repeat
lighting procedure. Once the pilot has been established, rotate the knob counter clockwise
towards the larger flame symbol to light the main burner. If no gas comes through to the main
burner, rotate the left hand knob (thermostat) to a hotter room setting and the fire will light.
Pilot burner position
Main burner position
Main burner operational & thermostatically controlled
1.4
To turn the fire off, rotate the right-hand knob fully clockwise back to its OFF position.
Off position