23
Electrical installation
9.7. electrical installation Devicenet
9.7.1. Bus connection (circular connector
m12 x 1, 5-pole, male)
The control head features a 5-pole micro-style circular connector.
The following configuration conforms to the DeviceNet specification.
→
Connect the control head according to the table.
pin
1
2
3
4
5
signal
Shielding V +
V –
CAN_H
CAN_L
Tab. 8: Pin assignment circular plug-in connector DeviceNet
Pin 4: CAN_H
white
Pin 5: CAN_L
blue
Pin 1: Drain
(Shield)
Pin 3: V–
black
Pin 2: V+
red
Data lines
Supply voltage
11 – 25 V DC
max. power 3 W,
if valve is switched
Fig. 18: View of plug from the front onto the pins, the soldered connections
are behind
9.7.2. configuring the control head
Setting the Dip switches
DIP switches
for bus address
and baudrate
Fig. 19: DIP switches DeviceNet
8 DIP switches are available for configuration:
• DIP switches 1 to 6
for the DeviceNet address
• DIP switches 7 to 8
for the baudrate
procedure:
→
The DIP switches can be accessed by unscrewing the body
casing (stainless steel).
→
Set the DIP switches according to the following tables.
english
Type 8691
