Burkert MS08, Operating Instructions Manual

Page: 61 / 84

Type MS08
General Settings - Parameter
61
Name Data type Unit SI Range Event timer
(ms)
Inhibit time
(ms)
TOCeq (Total Organic Car-
bon)
REAL32 g/l 0…880 5000 500
Tab. 37: PDO 3 - Transmitted data and their default values
Multiplexed PDO
Name Data type Unit SI Range Event timer
(ms)
Inhibit time
(ms)
Transmission 254nm REAL32 % 3…98.8 - 500
Transmission 530nm REAL32 % 3…98.8 - 500
Absorption 254nm REAL32 1/m 0.1…1500 - 500
Absorption 530nm REAL32 1/m 0.1…500 - 500
SQI (Quality Index) REAL32 - 500
Tab. 38: Multiplexed PDO - Transmitted data and their default values
Received PDO
The product receives from other participants to the fieldbus the PDO 1 described in the following table:
Name Data type Unit SI Range Event timer
(ms)
Inhibit time
(ms)
Hold UNSIGNED8 - - - -
Tab. 39: Received PDO 1 and its default values
To set the transmission time between 2 values of the PDO, do the following procedure:
Make sure that the login user level is Installer . Refer to chapter Available login user levels [
}
35] .
Go to device SAC254 Sensor > function General settings > tab Parameter .
Select PDO configuration > PDO 1 , PDO 2 , PDO 3 or Multiplexed PDO .
Select Inhibit time and enter a value in ms.
Repeat for any value you want to adjust.
To reset all values to default, select Reset to default values .
To apply and save the changes, select Apply and Save .
The PDO inhibit times are changed.
12.19 Restore all PDOs to their default values
Make sure that the login user level is Installer . Refer to chapter Available login user levels [
}
35] .
Go to device SAC254 Sensor > function General settings > tab Parameter .
Select PDO configuration .
Select Reset to default values .
The PDOs are set to their default values.