Burkert MS08, Operating Instructions Manual

Page: 35 / 84

Type MS08
Setting and operation
35
▪ the product functions. Each function has 3 menus. Refer to chapter Product functions and menus
[
}
36] .
▪ the Messages overview , overview of the messages that are related to both the system and the product.
Refer to chapter Read the generated events [
}
65] .
▪ the Logbook , overview of the messages that are related to the product. Refer to chapter Read the gen-
erated events [
}
65] .
8.4 Available login user levels
The following 4 login user levels are available:
▪ the basic user level, which is the level with the least functions,
▪ the Advanced User user level,
▪ the Installer user level,
▪
the Bürkert user level.
By default, the settings of the product are protected by passwords.
Table Login user levels [
}
35] shows the symbol displayed in the information bar, depending on the user
level that is active on the product, and what can be done with each type of user level. The symbol is dis-
played only if the settings are protected through passwords.
Symbol User level Description
Basic user ▪ No password is required.
▪
This level is active by default (and by default, password
protection is switched off).
▪ The menu items with the symbol enable read-only
access.
▪ Not all the menu items that are available with a higher user
level are displayed.
Advanced User ▪ Password required, if the password protection is active.
Default password is 5678.
▪
The menu items with the symbol enable read-only
access.
▪ Not all the menu items that are available with a higher user
level are displayed.
Installer ▪ Password required, if the password protection is active.
Default password is 1946.
▪ All the available menu items can be adjusted.
Bürkert ▪ Password required, if the password protection is active.
▪
Only for Bürkert service.
Tab. 19: Login user levels
▪
If you have forgotten your passwords, you can restore the default passwords with the Type 8920 Bürk-
ert Communicator software. Refer to the related Operating Instructions.
▪ If you want to change the passwords, refer to the Type 8920 Operating Instructions.