Burkert Flowave 8098, Operating Instructions Manual

Page: 287 / 354

287
Type 8098 FLOWave L
18 OUTPUTS – PARAMETER ..................................................................................................................288
18.1 Default settings ........................................................................................................................288
18.2 Changing the type of output 3 .................................................................................................288
18.3 Setting the parameters of an analogue output .......................................................................289
18.3.1 Changing the process value and the process value range associated to
an analogue output ..................................................................................................289
18.3.2 Choosing the damping level of the values transmitted on an analogue output ...290
18.3.3 Configuring the behaviour of an analogue output depending on the sta-
tus of the device ......................................................................................................291
18.4 Disabling an analogue output .................................................................................................292
18.5 Setting the parameters of a digital output .............................................................................292
18.5.1 Configuring a digital output as an on/off output ....................................................293
18.5.2 Configuring a digital output as an output with switching thresholds ...................294
18.5.3 Configuring a digital output as a frequency output ...............................................295
18.5.4 Configuring a digital output as a pulse output ......................................................296
18.6 Resetting all the parameters of an output to their default values .........................................298
18.7 Resetting all the parameters of all the outputs to their default values ..................................298
19
OUTPUTS – DIAGNOSTICS ...............................................................................................................299
19.1
Analogue output: reading out the current status and the values of the current ...................299
19.2
Digital output: reading out the mode, the current status and the current value ...................299
20 OUTPUTS – MAINTENANCE ..............................................................................................................300
20.1 Calibrating an analogue output ...............................................................................................300
20.2 Checking the correct operation of an analogue output .........................................................300
20.3 Resetting the calibration data of an analogue output to its default values ..........................301
20.4 Resetting the calibration data of all the analogue outputs to its default values ...................301
20.5 Checking the correct operation of an on/off output or a threshold output ...........................302
20.6 Checking the correct operation of a frequency output ..........................................................302
20.7 Checking the correct operation of a pulse output .................................................................303
Menu
Outputs
English