298
Outputs – Parameter
Type 8098 FLOWave L
18.6
Resetting all the parameters of an output to their
default values
To reset all the parameters of an output to their default values, do the following:
→
Go to the
CONFIGURATION
view.
→
Outputs
→
Confirm to access the
Parameter
view.
→
Choose an output
→
Reset to default
→
To reset the parameters of the selected output
All the parameters of the output are reset.
→
To acknowledge the displayed message.
18.7
Resetting all the parameters of all the outputs to their
default values
To reset all the parameters of all the outputs to their default values, do the following:
→
Go to the
CONFIGURATION
view.
→
Outputs
→
Confirm to access the
Parameter
view.
→
Reset to default
→
To reset the parameters of all the outputs
The parameters of all the outputs are reset.
→
To acknowledge the displayed message.
English
Summary of Contents for Flowave 8098
