13
Assemblyandinstallation
Position Designation
1
Rigid pipeline, e.g. copper
2
Fixing the pipeline to the chassis with a pipe clip
3
Fixing the pipelines one below the other
4
Hose clip
5
Flexible rubber hose
→
Connect line connections to the media lines (1). To do this, use
a flexible hose (5) which is attached with suitable hose clips (4).
The distance X between the pipeline and line connection should
be approx. 50 mm.
→
Ensure that the pipeline is securely attached to the vehicle
frame (2).
→
Ensure that the various installed pipelines in the vehicle are not
subject to forces or vibrations (3).
→
Observe flow direction.
7.3.2 Pneumatic connection
NOTE!
Leaking or distorted air mains can lead to malfunctions.
Tight and continuous hose connections are essential for the
flawless functioning of the device.
▶
Cut the hose ends of the air lines at right angles, clean and
burr-free to ensure a proper connection.
▶
Position the air mains with a sufficient bending radius so that
the air flow is not impaired by kinking.
→
Connect the control air to the valve control unit.
english
Type 8835
