31
Packaging, transport, storage
Cable gland:
→
Open the Pneumatic Control Unit: unscrewing the transparent
cap in an anticlockwise direction.
→
Unscrew the screw terminals and pull out cables.
3. Mechanical connection
→
Loosen the fastening screws.
→
Remove the Pneumatic Control Unit upwards.
Pneumatic
Control Unit
Transparent cap
Fastening screws
(2x)
Pneumatic
connections
Pneumatic con-
nection to the
actuator
Actuator
Cable gland
Series 21xx
Series 20xx
Fig. 28: Disassembly the Pneumatic Control Unit
13.
PACKAGING, TRANSPORT,
STORAGE
NOTE!
Transport damages.
Inadequately protected equipment may be damaged during
transport.
▶
During transportation protect the device against wet and dirt
in shock-resistant packaging.
▶
Avoid exceeding or dropping below the permitted storage
temperature.
▶
Protect the electrical interfaces and the pneumatic connec-
tions from damage by placing protective caps on them.
Incorrect storage may damage the device.
▶
Store the device in a dry and dust-free location!
▶
Storage temperature -20...+65 °C (-4...+149 °F).
Damage to the environment caused by device components
contaminated with media.
▶
Dispose of the device and packaging in an environmentally
friendly manner.
▶
Observe applicable regulations on disposal and the environment.
english
Type 8697
Summary of Contents for 8697
Page 32: ......
Page 33: ...www burkert com ...
