20
Installation
7.6.
Manual actuation of the actuator
via pilot valve
The actuator can be moved without a power supply from the rest
position to its end position and back again, when the control air is
connected.
To do this, the pilot valve must be actuated with a screwdriver.
NOTE!
The hand lever may be damaged if it is simultaneously
pressed and turned.
▶
Do not press the hand lever when turning it.
Pilot valve non
activated
(normal position)
Hand lever
Hand lever
to the left
Pilot valve
activated
Hand lever
to the right
Fig. 17: Pilot valve for aerate and deaerate the actuator
Move actuator to end position
→
Turn the hand lever to the right using a screwdriver.
Note:
Do not press the hand lever when turning it
Move actuator back to the rest position
→
Turn the hand lever to the left using a screwdriver.
Note:
Do not press the hand lever when turning it
english
Type 8697
Summary of Contents for 8697
Page 32: ......
Page 33: ...www burkert com ...
