24
Control and display elements
AUTOMATIC operating state (manual LED is not lit):
Button Function/LED
1
Press longer than 2 s: (< 5 s, cutoff LED flashes at
5 Hz (0 – 2 s) and at 10 Hz (2 – 5 s)):
Activates/deactivates CUTOFF function
CUTOFF function activated: Cutoff LED is lit yellow
Press longer than 5 s (< 10 s, status LED is lit orange):
Starting the X.TUNE function
2
Press longer than 2 s (cutoff LED flashes at 5 Hz
(0 – 2 s) and at 10 Hz (2 – 5 s)):
Activates/deactivates CHARACT function
CHARACT function activated: charact LED is light green
1 and 2 simultaneously
Press longer than 2 s (< 10 s, manual LED flashes at
5 Hz, 0 – 2 s)):
Switching to MANUAL operating state
Press longer
than 10 s (< 30 s, manual LED and
charact LED flash at 5 Hz, 10 – 30 s):
Device restart
Press longer
than 30 s (manual LED, charact LED and
cutoff LED flash at 10 Hz, > 30 s):
Reset device to factory setting
Tab. 10:
ConfigurationofthebuttonsforAUTOMATICoperatingstate
11.3
Display of the LEDs
Button
2
Button
1
Status LED
Communications
interface
Cutoff LED
Manual LED
Charact LED
Fig. 19: Display of the LEDs
Status LED (RGB)
Display of the device status and valve
position
Cutoff LED (yellow)
CUTOFF active/inactive
Manual LED (red)
Operating state HAND active/inactive
Charact LED (green)
CHARACT active/inactive
Cutoff LED
Color
Status
Description
yellow
is lit
CUTOFF active
yellow
is not lit
CUTOFF inactive
Tab. 11:
CutoffLED
english
Type 8696 REV.2
Summary of Contents for 8696 REV.2
Page 29: ......
Page 30: ...www burkert com ...
