Burkert 8696 REV.2, Quick Start Manual

Page: 21 / 30

21
Start-up
10.4 IO-Link
10.4.1 Information, IO-Link
IO-Link is an internationally standardized IO technology (IEC
61131-9) to enable sensors and actuators to communicate.
IO-Link is a point-to-point communication with 3-wire connection
technology for sensors and actuators and unshielded standard
sensor cables.
To ensure clear communication, the IO-Link devices should not
be parameterised simultaneously by the higher-level controller
(PLC) via the IO-Link master and with the Bürkert Communicator
(via the service
10.4.2 interface).Technical specifications, IO-Link
IO-Link specifications V1.1.2
Supply via IO-Link (M12 x 1, 5-pin, A-coded)
Port Class B
SIO mode no
IODD file see Internet
VendorID 0x0078, 120
DeviceID see IODD file
ProductID 8696
Transmission speed COM3 (230.4 kbit/s)
PD Input Bits 80
PD Output Bits 40
M-sequence Cap. 0x0D
Min. cycle time 1 ms
Data storage Yes
Max. cable length 20 m
10.4.3 Configuration of the fieldbus
The required start-up files and the description of the process
data and acyclic parameters are available on the Internet.
Download from:
www.burkert.com / Type 8696 / Software
10.5 büS
10.5.1 Information, büS
büS is a system bus developed by Bürkert with a communication
protocol based on CANopen.
10.5.2 Configuration of the fieldbus
The required start-up files and the description of objects are
available on the Internet.
Download from:
www.burkert.com / Type 8696 / Software
english
Type 8696 REV.2