manualshive.com logo in svg

Burkert 8695 Series, Operating Instructions Manual, Page: 47 / 68

Share
Download
Burkert 8695 Series Operating Instructions Manual Download Page 47

47

Start-up

10.4 

IO-Link

10.4.1  Information, IO-Link

IO-Link is an internationally standardized IO technology (IEC 61131-9) to enable sensors and actuators to 

communicate.
IO-Link is a point-to-point communication with 3-wire connection technology for sensors and actuators and 

unshielded standard sensor cables.

To  ensure  clear  communication,  the  IO-Link  devices  should  not  be  parameterised  simultaneously  by  the 

higher-level controller (PLC) via the IO-Link master and with the Bürkert Communicator (via the communication 

interface).

10.5 

Configuration of the fieldbus

The required start-up files and the description of the process data and acyclic parameters are available on 

the Internet.

Download from:

 

www.burkert.com

 / Type 8695 / Software

10.6 

büS

10.6.1  Information, büS

büS is a system bus developed by Bürkert with a communication protocol based on CANopen.

10.6.2  Configuration of the fieldbus

The required start-up files and the description of objects are available on the Internet.

Download from:

 

www.burkert.com

 / Type 8695 / Software

english

Type 8695 REV.3

Summary of Contents for 8695 Series





































































Reviews:

No comments