manualshive.com logo in svg

Burkert 8653 AirLINE Field, Operating Instructions Manual, Page: 7 / 43

Share
Download
Burkert 8653 AirLINE Field Operating Instructions Manual Download Page 7

7

Intended use

Type 8653

2 

inTended use

The AirLINE Field Type 8653 field module is designed to control and record the switching statuses of 

pneumatically actuated process valves, pneumatic cylinders and other pneumatically actuated actu-

ators directly in the process environment.

 

►

Use the device for its intended purpose only. Non-intended use of the device may be dangerous to peo

-

ple, nearby equipment and the environment. 

 

►

Do not use the device in the potentially explosive atmosphere.

 

►

The prerequisites for safe and efficient operation are correct transport, storage, assembly, installation, 

start-up, operation, and maintenance.

 

►

When using the device, observe the permitted data, operating conditions and application conditions. 

This information can be found in the contractual documents, the operating instructions and on the type 

label.

 

►

Use the device only in conjunction with third-party devices and components recommended and author

-

ised by Bürkert.

 

►

Make sure the device is in a technically flawless state before use.

The device is intended only for use in industrial areas.
The device is not suitable for use in applications where there is a risk to life and limb.

english

Summary of Contents for 8653 AirLINE Field












































Reviews:

No comments