Burkert 8653 AirLINE Field Operating Instructions Manual Download Page 22 | Manualshive

Page: 22 / 43

Burkert 8653 AirLINE Field Operating Instructions Manual Download Page 22

22

Electrical connection

Type 8653

8.1

Connecting the functional earth

Warning

Malfunctioning caused by electrostatic discharge.

Electrostatic discharge at the device may cause malfunctioning.

►

Assembly on wall: Depending on the installation situation, use a

short

cable with a

large

cross-section

to connect the device to the functional earth.

►

Assembly on standard rail: Depending on the installation situation, use a

short

cable with a

large

cross-section to connect the standard rail to the functional earth.

Danger due to electromagnetic fields.

If the functional earth (FE) is not connected, the conditions of the EMC Law are not observed.

►

Assembly on wall: Depending on the installation situation, use a

short

cable with a

large

cross-section

to connect the device to the functional earth.

►

Assembly on standard rail: Depending on the installation situation, use a

short

cable with a

large

cross-section to connect the standard rail to the functional earth.

8.1.1

Connecting the functional earth for assembly on wall

Earthing bolt M4

Fig. 10:

Earthing bolt on the rear of the device (shown without the bracket)

→

Use a short cable with a large cross-section to connect the earthing bolt M4 to the functional earth.

english

«
...
20
21
22
23
24
...
»

Summary of Contents for 8653 AirLINE Field












































Reviews:

No comments