Burkert 7012 Series, Operating Instructions Manual

Page: 5 / 14

5
4 Technical daTa
4.1 Conformity
The solenoid valve Type 7012 conforms to EC directives as per the
EC Declaration of Conformity.
4.2 Standards
The applied standards, which are used to verify compliance with the
directives, can be found in the EC type-examination certificate and/
or the EC Declaration of Conformity.
4.3 Operating conditions
Warning
Risk of injury due to malfunction if used outdoors.
▶
Do not use the device outdoors and keep it away from heat
sources that could cause the permissible temperature range to
be exceeded.
Ambient temperature max. +55 °C
max. +75 °C
Medium temperature max. +100 °C
Media neutral gaseous and liquid media that do not
attack the housing and seal materials (see
resistance table at www.country.burkert.com ).
Viscosity max. 21 mm²/s
Degree of protection IP65 as per EN 60529 with cable plug
4.4 Mechanical data
Dimensions see data sheet
Body material brass, polyamide (PA), stainless steel 1.4305
Seal material FKM, EPDM
4.5 Fluidic data
Circuit functions
C
(NC)
NC NO
3/2-way valve, closed in rest
position, outlet A relieved
D
(NO)
NO NC
3/2-way valve, outlet B pressurised
in rest position
Pressure range 0–16 bar
Port connections M5, G1/8, flange
English