2
Table of Contents
1 The operating instructions ..................................................................................................2
2 Authorized use ..............................................................................................................................3
3 Basic safety instructions.......................................................................................................4
4 Product description ...................................................................................................................6
5 Technical data................................................................................................................................6
6 Installation.........................................................................................................................................8
7 Maintenance, troubleshooting .......................................................................................11
8 Disassembly .................................................................................................................................12
9 Transportation, storage, disposal ................................................................................13
1
The operaTing insTrucTions
The operating instructions contain important information.
▶
Read the instructions carefully and follow the safety instructions.
▶
Keep the instructions in a location where they are available to every
user.
The liability and warranty for Type 0312 are void if the operating
instructions are not followed.
1.1 symbols
Danger!
Immediate danger! Serious or fatal injuries.
WarnIng!
Possible danger! Serious or fatal injuries.
CautIon!
Danger! Moderate or minor injuries.
note!
Warns of damage to property.
english
3
The Type 0312
▶
In a potentially explosive area, the device may be used only in accor-
dance with the specification on the type label. For the use, observe
the supplementary instructions manual enclosed with the device with
safety instructions for the explosion-risk area.
▶
Devices without a separate Ex type label may not be used in a poten-
tially explosive area.
▶
The enclosed UL instructions must be followed in the UL area.
▶
used only in conjunction with third-party devices and components
recommended and authorised by Bürkert.
▶
when in perfect condition and always ensure proper storage, trans-
portation, installation and operation.
▶
use the device only as intended.
2.1 restrictions
If exporting the device, observe any existing restrictions.
Important tips and recommendations.
Refers to information in these operating instructions or in other
documentation.
▶
Designates instructions for risk prevention.
→
Designates a procedure which you must carry out.
1.2 Definitions of terms
In these instructions, the term “device” always refers to the Type 0312.
2
auThorizeD use
The Type 0312 is designed for blocking, dosing, filling and
venting neutral gaseous and liquid media.
▶
Use according to the authorized data, operating conditions and
conditions of use specified in the contract documents and operating
instructions.
english
4
2.2 approvals
The approval mark indicated on the Bürkert type labels refers to the
Bürkert products.
e
1
03 5791
Devices which must bear the type approval mark were approved at the
Kraftfahrtbundesamt under the type approval number
e1*72/245*2006/96*5791*00
and are put into circulation with the indicated type approval mark. You can
obtain an extract of the type approval from the address below.
Bürkert Werke GmbH
Zulassungsbeauftragter,
Christian-Bürkert-Str. 13-17,
D-74653 Ingelfingen
3
Basic safeTy insTrucTions
These safety instructions do not make allowance for any contingencies
and events which may arise during assembly, operation and maintenance.
Risk of injury from high pressure in the system/device.
▶
Before working on the system or device, switch off the pressure
and vent/drain lines.
Risk of injury due to electrical shock.
▶
Before working on the system or device, switch off the power supply
and secure to prevent reactivation.
▶
Observe applicable accident prevention and safety regulations for
electrical equipment.
Risk of burns/risk of fire if used for a prolonged switch-on time
through hot device surface.
▶
Keep device away from highly flammable substances and media and
do not touch with bare hands.
english
Type 0312
