2
I Englsih
secuENTRY HOME 5000 CYL
Set contents
I
ENTRY 7711 Keypad PIN
II
Screwdriver Tx8
III
Dowels (3x)
IV
Screws (3x)
V
Adhesive pads (4x)
VI
Quick Start Guide plus
warranty and
disposal instructions
Keypad power supply
2x Mignon LR6 AA Alkaline
Permitted ambient conditions
-15 °C/+50 °C / up to 95 %
relative humidity (non-condensing)
Radio standard
Bluetooth 5.2
Range
Approx. 4 m
Weather protection class (IP class)
IP53
Blocking times
After an incorrect code is entered 3x, 1 minute,
thereafter always 3 minutes
Fig. 2
Fig. 3
Technical details
QR code/Administrator code
QR
QR code (I) and security code (SCD) (II) are
required for integrating the keypad into the
BURG-WÄCHTER KeyApp (Fig. 2).
Attention:
The QR code and the security code are not
stored by BURG-WÄCHTER. Recovery is not
possible if the codes are lost. Please store the
sticker shown to the right in a safe place. In
addition, it is recommended that you take a
photo of the sticker and archive it digitally.
!
ON button
Activates the keypad. Provided that the connected secuENTRY cylinder
supports the function, an entry
"Opened"
(ON button) or
"Closed"
(CLOSE button) is generated in the history. This allows for the "Open"
and "Close" operations to be differentiated in the history.
CLOSE button
Error message The two LEDs next to the X symbol will illuminate if an invalid number
combination is entered or if general errors occur.
Battery status
The system monitors the keypad and cylinder battery voltage. The
user is alerted as soon as the battery voltage reaches a critical range.
Batteries must be changed as soon as possible after the battery status
symbol illuminates.
Cylinder status When the number combination entered is correct, the cylinder status
symbol will illuminate and the door can be unlocked or locked.
Status LED
The LEDs illuminate one after the other in a clockwise direction when
the keypad is in programming mode (see chapter below).
ENTRY 7711 Keypad PIN
The
ENTRY 7711 Keypad PIN
can be used to operate electronic secuENTRY cylinders from
BURG-WÄCHTER. Communication between the keypad and the profile cylinder is 128-bit AES
encrypted.
Operation on the illuminated keypad is carried out via push-buttons. Consequently, the keypad can
be easily operated even in poor lighting conditions.
The
ENTRY 7711 Keypad PIN
enables the door to be opened and closed with the aid of a 6-digit PIN
code. There are one million possible number combinations for generating the code.
The integrated tamper protection locks the entry for one minute after three incorrect entry
attempts. From the fourth incorrect entry, the keypad is locked for three minutes each time.
The keypad is splash-proof on all sides according to IP53 certification.
ON button
CLOSE button
Cylinder status
Battery status
Entry prompt
Status LED
Status LED
I
II
Fig. 1
I
II
III
IV
V
VI